SG - Standard grade heat shrink sleeves

Highly flexible heat shrink tubing with a shrink ratio of 2:1. Made of flexible polyolefin. Used for wire identification. Markers are supplied on a roll, in a flattened format, on a backing which can also be printed to aid sorting.

Buy

Product characteristics

Flame retardant
Self-extinguishing
Easy to apply
Form of a ladder
Available widths of 12.5 mm - 25 mm - 50 mm
Print is also possible on the foundation (above or below the marker)

Product properties

Shrink ratio

2:1

Continuous operating temperature

from -55 °C to 125 °C

Tensile strength (min.)

10.4 MPa

Elongation at break (min.)

250 %

Minimum shrink temp.

90 °C

Longitudinal change (max.)

-7 %

Material

Flexible polyolefin

Working Temperature

from -55 °C to 125 °C

Print

Thermal transfer

Download

Product sheet (SG)

SG-024

Diameter after shrinking

1.2 mm
Diameter before shrinking

2.4 mm

SG-032

Diameter after shrinking

1.6 mm
Diameter before shrinking

3.2 mm

SG-048

Diameter after shrinking

2.4 mm
Diameter before shrinking

4.8 mm

SG-064

Diameter after shrinking

3.2 mm
Diameter before shrinking

6.4 mm

SG-095

Diameter after shrinking

4.75 mm
Diameter before shrinking

9.5 mm

SG-127

Diameter after shrinking

6.4 mm
Diameter before shrinking

12.7 mm

SG-180

Diameter after shrinking

9 mm
Diameter before shrinking

18 mm

SG-254

Diameter after shrinking

12.7 mm
Diameter before shrinking

25.4 mm

SG-381

Diameter after shrinking

19.1 mm
Diameter before shrinking

38.1 mm

SG-508

Diameter after shrinking

25.4 mm
Diameter before shrinking

50.8 mm